9V Li-Fe-PO4 rechargeable battery is designed for replacing 9V Ni-MH battery with longer service life and lower cost.
Compared with Ni-MH battery, its advantages include:
Real 9V volt working platform (Normal 9V Ni-MH works on 8.4V) > 1000 cycle life (9V Ni-MH only has 500 cycles) 2.7A drain rate (9V Ni-MH has only 0.2A) 50% less weight Lower self-discharge rate (remain 80% energy after 2 months, but zero in 9V Ni-MH ) 40% Lower cost (consider cycle life ) Perfect for Paintball gun, multi-meter and alarm devices to replacing 9V alkaline and Ni-MH battery
Cautions:
Li-Fe-PO4 battery must be cut-off at 3.8V/cell condition when charging. Please use a charger as recommended as the above only
You must limit discharging rate below Max discharge rate.
Type
RechargeableLithium-ion
Model
PFB 9V-200mAh
Dimension
(48.5+/-.0.5)*(25.9+/-0.2)*(15.2+/-0.3)mm
C5mAh
200
C5mA
200
Nominal Voltage
9.6V
Capacity
Nominal 200mAh
Minimum 190mAh
when discharged at 0.2C5mA to 7.5V
Recommended Charging Conditions
0.2C5mA charge termination control parameters taper current 0.01C5mA at10.95V
Service Life
1000cycles(>60% C5mAh,0.2C discharge)
Weight
< 30g
Charging Voltage
10.95+/-0.15V
Protection Circuit Module
Over Voltage Limit: 4.275 +/- 0.04 V /CELL
Under Voltage Limit: 2.5 +/- 0.08 V/CELL
Over Current Protection: 1 A~ 3A @ Room Temp.
Max. Quiescent Drain: 7 µA
Ambient TemperatureRange
Charging: 0~ +45centigrade..
Discharging: -20~ +60centigrade.
Storage:-20~ +40centigrade.
200mAh 9.6V LiFePo4
High discharging rate,
Non explosive,
Lighter weight and much safe
Rated Voltage: 9.6V
Rated Capacity: 200mAh
Min. Capacity: 190mAh (20+/-5oC, 0.2C5mA discharged to 7.50V)
Charging Conditions: 0.2C~0.8C,charge the battery to 10.95V, charge at CV till
the current is less than 0.01C
Cycle Life: 300 (>80%C5mAh)
Weight: <30g
Impedance: <450m??
Charging Voltage: 10.95 +/- 0.05V
Temp. Range: Charging: -0~+45oC
Discharging:-20~+60oC
Storage:-0~ +40oC
Priview: