Li-Fe-PO4 IFR18650 Rechargeable:1400mAh 3.2V

New Generation Li-Ion Battery ( Li-Fe-PO4): High discharging rate, non explosive, lighter weight and much safe

             DATA SHEET

TYPE --------------------------- CYLINDRICAL

MODEL ----------------------------- IFR18650

SPECIFICATION-------------------------18650

Nominal voltage ----------------------- 3.2V 

Weight approx. ------------------------- 37g

C₅mAh---------------------------------1400mAh

Charge voltage----------------- 3.650+-0.05V

Minimum discharge end voltage---------- 2.5V

Maximum charge voltage----------------- 4.2V

Maximum continuous charge current------ 2800mA

Maximum continuous discharge current--- 2800mA

Dimension (including shrink sleeve/label)

Diameter£¬d ---------------------18.1+-0.2mm

height£¬h ----------------------- 65.0+-0.5mm

Capacity (20^oC, 0.2 C₅ to 3.0V)

Minimum capacity---------------------- 1350mAh

Internal impedance  (20+-5)<60

Charge conditions (20+-5)

Standard charge------------------0.5I_tmA CC/CV

Fast charge---------------------- 1I_tmA CC/CV

Operation conditions (recommended£©

Storage--- Temperature(15-35)

Relative humidity (45-75%)

Pressure (86-106KPa)

Discharge--------------------------- 0-60

Standard charge----------------------- 0-45

Standard Test Conditions (Except additional quest)

Temperature------------------------ 20+-5

Relative humidity-------------------- 65+-20%

Applications
RC Car Racing
Airsoft gun
RC robots
E-bike
Emergency Light

Detail Data Sheet
Please download the Li-Fe-PO4 18650 Cylindrical Cell 3.2V 1400 mAh specifications

Smart charger You can choose our smart cable and plug it into a smart Li-Ion charger to recharge Li-Fe-PO4 battery pack. Must use the suitable smart cable with related charger below :

Automatic Smart Charger (0.5A) for 3.0V (1 cell, 3.8V cut-off) LiFePo4 battery Pack
Smart Fast Charger (1A) For any 6.0V (2 cells, 7.6V cut-off) LiFePO4 Battery Pack
Smart Charger (0.5A) for 9.0 V LiFePO4 battery Pack (3 cells, 11.4V cut-off)
Smart Charger (0.5A) for 12.0V LiFePO4 battery Pack (4 cells, 15.2V cut-off) Cautions

Li-Fe-PO4 battery must be cut-off at 3.8V/cell condition when charging
You must limit discharging rate below Max rate
Please see our damage test report to understand our specs and limit your application within specs